Lockdown Nine (the most bored week so far…)

This gallery has the continuation of my ‘draw every day’ attempt, so far I’ve managed every day since the 6th May

and now through June since the 6th.

I continued with the scyulptures, making six maquettes last week.

These are using the cast plaster rocks and the steel rod. I managed to submit for the Cast ‘Scratch Night’, that might be interesting (if I get it) and continued working on the ‘et in arcadia ego’ models.

I finished this painting.

Still life with fox jaw, lemon and dried rose

There is now a set of five of these,

each 10 inch square, oil on board, an attempt to relearn painting by drawing directly with paint onto the board. The middle one is in the Doncaster Art Fair competition on line and I’ve got my fingers crossed.

I’ve tried gilding the first of the small sculptures, that and painting being the next step, and it looks like this now

 ‘Balby Garden No5 (June 2020)’ plaster, steel rod, paper; 1’x1’x1’6” approx.

‘Balby Garden No5 (June 2020)’ plaster, steel rod, paper; 1’x1’x1’6” approx.

 ‘Balby Garden No5 (June 2020)’ plaster, steel rod, paper; 1’x1’x1’6” approx.

‘Balby Garden No5 (June 2020)’ plaster, steel rod, paper; 1’x1’x1’6” approx.

 ‘Balby Garden No5 (June 2020)’ plaster, steel rod, paper; 1’x1’x1’6” approx.

‘Balby Garden No5 (June 2020)’ plaster, steel rod, paper; 1’x1’x1’6” approx.

Still thinking about the VR work and how to build a structure to house the experience. Also varnishing BGNo5 and finishing the others.

Still difficult to focus thoughts on the work as its impossible to get away from it!

 

Lockdown Six (and on, and on, and on…)

Lazy post this week…

The gallery has been updated with the daily drawings.

I’ve also spent quite a bit of time working up the parts for some maquettes, the series of photographs tell the story…

paper drying in the sun

paper drying in the sun 25/05/20

mould making for rocks

mould making for rocks 27/05/20

mould making for rocks 27/05/20

mould making for rocks 27/05/20

finishing the moulds

finishing the moulds 28/05/20

Outdoor workspace

Outdoor workspace 28/05/20

Solid Castings

Solid Casting 30/05/20

Solid Rocks and half rocks

Solid Rocks and half rocks cast in plaster of paris 29 & 30/05/20

Outdoor workspace 31/05/20

Outdoor workspace 31/05/20

Plinths

Plinths 31/05/20

I’ve made a whole series of parts for the maquettes I’m planning.

I’ve also modelled the old backyard from the house I grew up in in Stoke on Trent for the VR piece I’m working on.

Onwards and onwards!

Lockdown Continued… (notice the calmer Title Case)

The VR world from the geranium project on simmer – www.simmer.io/@IanLatham/the-geranium-project – takes 8 minutes and 7 seconds to load.

The latest WebGL build on my own website – www.ian-latham.com/geranium/build – takes 11 minutes and 39 seconds to load.

I’ve spent hours trying to work out how to make the things load more quickly but everything I try seems to make little or no difference.

I participated in an online event for the Doncaster New Fringe art group, a kind of delayed open studio evening in which artists film their work and upload the videos to a website. This is the video I made Art Bomb Video for Doncaster New Fringe I found some old 3d models I made for sculptures over a number of years and built a VR environment for them, I then made an awful video of my studio and me explaining what I’d done in fluent gibberish and placed that video inside the VR world. I recorded that through the computer and there you go.

Other than that this week has been a lot of gardening, building a greenhouse, and the endless frustration of Unity!

greenhouse

My New Greenhouse

I finally got the WebGL build down to 6 minutes and 17 seconds! Or at least below 7 minutes over several tries, the load bar doesn’t work properly though.