Studio Build TWO

Studio 071118

A full day at the studio. A full day means arriving at 11:00 and leaving at 15:50, I am retired after all.

First off I stretched the paper in the foreground, I’ll be interest to see how this dries given the lack of heating and fabulous ventilation. The time is an hour ahead on this photo, I couldn’t be arsed to change the time when the clocks went back. I moved on to constructing the panels for part one of the installation.

I cut all the wood first, twenty eight short lengths and then moved onto assembling the panels. I got the timing down to fifteen minutes a panel when my portable drill finally charged up. Before that I was putting the screws in by hand, each panel has eight 100mm bullets and fourteen 25mm bullets. The photographs illustrate the very simple production line approach.

An aside for today about the electricity. The supplier is e-on and their standard tariff is around 15.75 pence per KWh. The meter read 277 when I took possession and read 283 after today’s work. The advantage of having only one socket to power everything from.

The video is here so you can hear the noise the rain makes on the corrugated roof.

Friday 9th November. Arrive at 10:45 am with a view to completing as much of the structure as I can. Obviously someone has been in on Thursday as the lights come on when I enter the building. As it’s Axisweb’s rental I have to accept access by them and the landlord without prior notice. This could be either and maybe I won’t see the visitor I’m expecting today.

I made eight frames today to add to the six from Wednesday, each frame uses 4×2.4m C16 CLS 3×2 (48x75mm) at £3.10 each length and one sheet of whiteface hardboard at £7.75, so £20.16 per frame plus screws. Eight 100mm bullets costs about £1.70 and sixteen 25mm bullets are 23 pence. So £22.09 x 14 is £309.20 for the whole assembly. You could say £310.00 including the electricity.

I’ve got one spare frame to test the surfaces for the internal finish and I’m still toying with having a door. There are also a few spots that will need extra screws to lie flatter. You can also see how dark it is, 15:30 in November.

Here ends week one of the new studio!

Studio 091118

Drawing Towards Sculpture [THREE]

[ONE] talked about the development of collage drawings from site specific drawings and notes, [TWO] took a diversion to discuss drawing as an act of translation and touched upon the drawing dictating its own ends, [THREE] examines the transition of the drawings to two new forms, stand alone 3d entities and an environment.

To start this post I have to step back to before the first post and talk about the reasons for addressing the thing that has sat at the back of my mind for years and is now asking to be experienced. I have always found gardens important. I can track my life through these outdoor spaces where I first experienced a simulacrum of freedom. Where I first daydreamed, projecting myself into a smaller world, that was at once battlefield, farmyard, football pitch. Where I buried hamsters, birds and cats. A space that has remained a place for play while the nature of playing has changed. Where the past is always drifting just out of sight bar the shadows in the corner of your eye. I have continually created gardens, or parts of gardens, since the 1980’s.

BA Final Show Installation 1982

This view of my BA final show in 1982 shows a selection of sculptures built from the observational drawings of storms and landscapes that are displayed behind them. Response to nature has always been there in my work. I was introduced to art in the late ’70’s as a way to explain rather describe, but increasingly I have come to see it as a way to suggest. To render an implication rather to only evidence an event or place.

Continuing with the translation of drawing into sculpture it is relatively easy to see the change from these collage/drawings

Collage Drawings 2018

Collage Drawings 2018

To this sculpture

Ptolemy's Garden 1

Ptolemy’s Garden 1

Or this one

Ptolemy's Garden 4

Ptolemy’s Garden 4

There is a clear line of, for want of a better word, progress between these small sculptures and the earlier ones.

The process through drawing to sculpture is led through the development of a repertoire of marks that are refined as the pieces develop. The pieces are stand alone but are always placed to accentuate their edges and to articulate empty space through their proximity.

The work also develops into environmental pieces – the installation of the exhibition illustrated above as an obvious example – or the piece I made for my MA at www.veilworld.co.uk
This particular range of work is growing into this environment. https://www.ian-latham.com/geranium/geranium.html

3D model view of proposed geranium project installation

3D model view of proposed geranium project installation